Francool Technology (Shenzhen) Co., Ltd.

Product NO. Typical use concentration 5% concentration dilution pH Diluent appearance Diluent appearance Performance Profile
  ALLCLEAN 2000 3.2%-5.0% (diluted with water at 1:30 to 1:19 / water dilution) 7.80 -9.20 Clear and transparent 1.00-1.08 High concentration cleaning agent. It has strong degreasing ability and low operating bubble, which can be used in hand washing operation. No corrosion of steel material, no corrosion of the aluminum material part, can quickly remove grease from metal surface, the most suitable for the cleaning of the heating oil when used to maintain mild, cleaning liquid can obtain better cleaning effect and lower at 50 degrees above the foam! Maintain the lowest recommended use concentration to ensure that every batch of cleaning results is consistent! It is also a good choice for cleaning iron metal for cleaning iron metal parts after washing for about one week. It is suitable for the operation of ultrasonic, low pressure spray, through type invading cleaning and batch concentration rinsing.The cleaning solution is maintained at 50 degrees centigrade for more cleaning effect and lower operating foam when it is used. Maintaining the lowest recommended concentration can ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, low pressure spray, through type immersion cleaning and batch concentration rinsing.
  ALLCLEAN 3010 3.2%-5.0% (diluted with water at 1:30 to 1:19 / water dilution) 9.00 -11.00 Clear and transparent 1.00-1.08 High concentration cleaning agent. It has a strong ability to remove oil pollution, high pressure operation and low bubble. No corrosion of steel materials, can quickly remove grease from metal surface, suitable for heating and spray cleaning to effectively remove heavy oil, cutting oil / work liquid and metal scraps, and short-term indoor rust protection of cast iron metal parts after cleaning, is a good choice for cleaning ferrous metals, excellent suppression global capacity, is an ideal cleaning agent in high pressure cleaning! Better cleaning effect and lower operating foam can be obtained by maintaining the cleaning fluid over 50 degrees in use. Maintain the lowest recommended concentration concentration to ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, medium and high pressure spray, through type invading cleaning and batch concentration rinsing.The cleaning solution is maintained at the above 50 degrees centigrade for more cleaning effect and lower operating foam when used. Maintaining the lowest recommended concentration can ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, low pressure spray, through type immersion cleaning and batch concentration rinsing.
  ALLCLEAN 3020 3.2%-5.0% (diluted with water at 1:30 to 1:19 / water dilution) 9.00 -11.00 Clear and transparent 1.00-1.08 High concentration cleaning agent. It has a strong ability to remove oil pollution, high pressure operation and low bubble. The aluminum alloy material has no rust and can quickly remove the oil pollution on the metal surface. It is most suitable for heating and cleaning heavy oil pollution, and it plays a protective role in the cleaning process of aluminum materials. It does not cause corrosion. It is suitable for cleaning various metal materials. In the medium high pressure spray cleaning show excellent foam suppression ability, the ideal cleaning agent in the middle and high pressure cleaning! Better cleaning effect and lower operating foam can be obtained by maintaining the cleaning fluid over 50 degrees in use. Maintain the lowest recommended concentration concentration to ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, medium and high pressure spray, through type invading cleaning and batch concentration rinsing.The cleaning solution is maintained at 50 degrees centigrade for more cleaning effect and lower operating foam when it is used. Maintaining the lowest recommended concentration can ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, low pressure spray, through type immersion cleaning and batch concentration rinsing.
  ALLCLEAN 3050 3.2%-5.0% (diluted with water at 1:30 to 1:19 / water dilution) 9.00 -10 .20 Clear and transparent 1.00-1.08 A concentrated cleaning agent for machine tools and cooling systems. It has super strong ability to remove oil pollution and operate low bubbles. It can quickly remove the residual oil and corruption and oxidation of fatty acids such as fatty acids. At the same time, it can effectively kill the bacteria and fungi that are parasitic on these oil stains, and ensure that the new cooling fluid is not contaminated by these bacteria and fungi. Keeping the operating space clean and reducing the cost of downtime and cleaning is the first choice for cleaning and maintaining the cooling system of machine tools. Cleaning the cutting fluid in the front row machine or the cooling system can reduce the dosage of the cleaning agent and save the cleaning cost.The cleaning solution is maintained at 50 degrees centigrade for more cleaning effect and lower operating foam when it is used. Maintaining the lowest recommended concentration can ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, low pressure spray, through type immersion cleaning and batch concentration rinsing.
  ALLCLEAN 3060 3.2%-5.0% (diluted with water at 1:30 to 1:19 / water dilution) 9.00 -11.00 Clear and transparent 1.00-1.08 The highly concentrated and environment-friendly cleaning agent is specially developed for cemented carbide cleaning. It contains no phenol, nitrite and other inorganic salts. It does not precipitate at high temperature and has no residue. It can effectively inhibit cobalt ion precipitation and ensure human health and tool hardness. The cleaning solution is maintained at 50 degrees centigrade for more cleaning effect and lower operating foam when it is used. Maintaining the lowest recommended concentration can ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, low pressure spray, through type immersion cleaning and batch concentration rinsing.The cleaning solution is maintained at 50 degrees centigrade for more cleaning effect and lower operating foam when it is used. Maintaining the lowest recommended concentration can ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, low pressure spray, through type immersion cleaning and batch concentration rinsing.
firstprevious1nextlast