Francool Technology (Shenzhen) Co., Ltd.

Commercial customers

Category Description :

Product Name Product Features
  CASTON 306 IS The use of the latest chemical technology to make the product more easy to wet mold, to achieve very excellent release and lubrication effect. It has excellent performance for large size die casting, such as gearbox shell, mechanical and electrical product shell mold release. It will not affect the adhesion of the coating on the casting work. It has high stability and no harm to the environment. It can be applied to the situation that the range of temperature change is large and the sintering and accumulation of the mould surface will not be produced. Packaging specifications: 20L, 200L barreled
  CASTON 90AZ This product is the use of long chain alkyl aluminum die-casting mould release lubricant composition, aqueous wax, high temperature and high polymer emulsion and coupling agent into the. In particular, it has good effect on the small and medium sized and thin wall die casting parts. Can take away more heat release agent, has a good effect on the control of the mold temperature, improve the mold quality, no carbon residue, the product surface no wave, good metallic luster. No petroleum products, mainly components that have no impact on the environment, fully meet the requirements of environmental protection. Packaging specifications: 20L, 200L barreled
  CASTON NMF It is a high performance die casting lubricant with long chain alkyl compounds, water waxes, connecting agents and different polymers. This product in the insulation, demoulding, lubrication and prevent sintering, coating thin effect excellent performance obvious to people but also improve the casting, tensile strength, extension and reduction of porosity produced. Application: magnesium alloy and zinc alloy.Demand precision die casting technology, electronic digital products, IT product shell, home appliance computer shell, thin wall and light die-casting products. Easy to clean, good after coating and processing. Packaging specifications: 20L, 200L barreled
  ALLCLEAN 2000 High concentration cleaning agent. It has strong degreasing ability and low operating bubble, which can be used in hand washing operation. No corrosion of steel material, no corrosion of the aluminum material part, can quickly remove grease from metal surface, the most suitable for the cleaning of the heating oil when used to maintain mild, cleaning liquid can obtain better cleaning effect and lower at 50 degrees above the foam! Maintain the lowest recommended use concentration to ensure that every batch of cleaning results is consistent! It is also a good choice for cleaning iron metal for cleaning iron metal parts after washing for about one week. It is suitable for the operation of ultrasonic, low pressure spray, through type invading cleaning and batch concentration rinsing.The cleaning solution is maintained at 50 degrees centigrade for more cleaning effect and lower operating foam when it is used. Maintaining the lowest recommended concentration can ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, low pressure spray, through type immersion cleaning and batch concentration rinsing.
  ALLCLEAN 3010 High concentration cleaning agent. It has a strong ability to remove oil pollution, high pressure operation and low bubble. No corrosion of steel materials, can quickly remove grease from metal surface, suitable for heating and spray cleaning to effectively remove heavy oil, cutting oil / work liquid and metal scraps, and short-term indoor rust protection of cast iron metal parts after cleaning, is a good choice for cleaning ferrous metals, excellent suppression global capacity, is an ideal cleaning agent in high pressure cleaning! Better cleaning effect and lower operating foam can be obtained by maintaining the cleaning fluid over 50 degrees in use. Maintain the lowest recommended concentration concentration to ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, medium and high pressure spray, through type invading cleaning and batch concentration rinsing.The cleaning solution is maintained at the above 50 degrees centigrade for more cleaning effect and lower operating foam when used. Maintaining the lowest recommended concentration can ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, low pressure spray, through type immersion cleaning and batch concentration rinsing.
  ALLCLEAN 3020 High concentration cleaning agent. It has a strong ability to remove oil pollution, high pressure operation and low bubble. The aluminum alloy material has no rust and can quickly remove the oil pollution on the metal surface. It is most suitable for heating and cleaning heavy oil pollution, and it plays a protective role in the cleaning process of aluminum materials. It does not cause corrosion. It is suitable for cleaning various metal materials. In the medium high pressure spray cleaning show excellent foam suppression ability, the ideal cleaning agent in the middle and high pressure cleaning! Better cleaning effect and lower operating foam can be obtained by maintaining the cleaning fluid over 50 degrees in use. Maintain the lowest recommended concentration concentration to ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, medium and high pressure spray, through type invading cleaning and batch concentration rinsing.The cleaning solution is maintained at 50 degrees centigrade for more cleaning effect and lower operating foam when it is used. Maintaining the lowest recommended concentration can ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, low pressure spray, through type immersion cleaning and batch concentration rinsing.
  ALLCLEAN 3050 A concentrated cleaning agent for machine tools and cooling systems. It has super strong ability to remove oil pollution and operate low bubbles. It can quickly remove the residual oil and corruption and oxidation of fatty acids such as fatty acids. At the same time, it can effectively kill the bacteria and fungi that are parasitic on these oil stains, and ensure that the new cooling fluid is not contaminated by these bacteria and fungi. Keeping the operating space clean and reducing the cost of downtime and cleaning is the first choice for cleaning and maintaining the cooling system of machine tools. Cleaning the cutting fluid in the front row machine or the cooling system can reduce the dosage of the cleaning agent and save the cleaning cost.The cleaning solution is maintained at 50 degrees centigrade for more cleaning effect and lower operating foam when it is used. Maintaining the lowest recommended concentration can ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, low pressure spray, through type immersion cleaning and batch concentration rinsing.
  ALLCLEAN 3060 The highly concentrated and environment-friendly cleaning agent is specially developed for cemented carbide cleaning. It contains no phenol, nitrite and other inorganic salts. It does not precipitate at high temperature and has no residue. It can effectively inhibit cobalt ion precipitation and ensure human health and tool hardness. The cleaning solution is maintained at 50 degrees centigrade for more cleaning effect and lower operating foam when it is used. Maintaining the lowest recommended concentration can ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, low pressure spray, through type immersion cleaning and batch concentration rinsing.The cleaning solution is maintained at 50 degrees centigrade for more cleaning effect and lower operating foam when it is used. Maintaining the lowest recommended concentration can ensure that the cleaning effect of each batch is consistent! It is suitable for ultrasonic, low pressure spray, through type immersion cleaning and batch concentration rinsing.
  AP MQ68 ● cooling, including selected wetting agent, product spreading is good.● steel high cleanliness, cleaning is excellent, can remove board surface contaminants, the best surface cleanliness.● anti-corrosion, rust-proof excellent.
  AP MR720 ● excellent rolling surface● surface annealing without leaving stains● In the high rolling speed, still have a larger reduction.● Long-term emulsion life, performance remained stable● Emulsion remains stable at high temperatures● excellent anti-corrosion rust
firstprevious123456...1112131415nextlast